Board logo

VX XE Oil Pump
DH2 - 10/11/11 at 07:38 PM

I am trying to mate an oil pressure sneder to the oil pump on my XE engine.
There appear to be two potential ports in the oil filter end of the oil pump, one of which has a pressure switch in it.




Does anyone know what thread sizes these two ports are, as I need to obtain an adapter to fit the 1/8 NPTF pressure sender into one of them? They both appear to be 1.5mm pitch thread, and not tapered...

Thanks in advance,
DH2

Ben_Copeland - 10/11/11 at 07:45 PM

This should tell you everything you need to know

http://www.migweb.co.uk/forums/engines-transmission/171368-xe-let-oil-pressure-temp-senders-what-why-how-where.html


M14x1.5 btw

[Edited on 10/11/11 by Ben_Copeland]

DH2 - 10/11/11 at 08:06 PM

quote:
Originally posted by Ben_Copeland
This should tell you everything you need to know

http://www.migweb.co.uk/forums/engines-transmission/171368-xe-let-oil-pressure-temp-senders-what-why-how-where.html


M14x1.5 btw

[Edited on 10/11/11 by Ben_Copeland]


Perfect! Thanks very much, Ben.

DH2