Board logo

URGENT help required: GSXR1000 Throttle bodies?
FASTdan - 8/12/11 at 01:58 PM

Does anyone have a set of these kicking about? If so can you measure the spacings and let me know?


Myke 2463 - 8/12/11 at 03:08 PM

Check emails. GSXR 750/1000 80-80-80 44mm id according to PPC.

[Edited on 8/12/11 by Myke 2463]


r1_pete - 8/12/11 at 03:47 PM

Which GSXR? I have a few sets of 1000 K8s, the two pairs of two type.


FASTdan - 8/12/11 at 04:33 PM

Any you have if possible please Pete

Thanks for the article Mike. that confirms 80-80-80 but just wondering if there are any variants at 78-78-78 Pete?

[Edited on 8/12/11 by FASTdan]


matt_gsxr - 8/12/11 at 05:47 PM

You need this thread,

http://www.msextra.com/forums/viewtopic.php?f=94&t=6627&start=20

It has a decent list of spacings etc.