Issue there was play in the gearlever so we purchased a quickshift kit, upon trying to fit we discovered it fits ok but the linkage is very weak and has play in it there were a couple of bushes and washers plus retainers that have perished.

Any help identify the pieces and a source to purchase from as per the attached picture.

2 x bushes
2 x nylon sleeves
1 x copper clip


Or can i simply just replace the mechanism with a extension turret mechanism from Rally Design ?

http://www.rallydesign.co.uk/product_info.php?products_id=13487

Thanks




[Edited on 27/3/12 by ej74]

Borrowed a pic from this thread - thanks

http://www.locostbuilders.co.uk/viewthread.php?tid=160676

It is the horizontal bar that i need and all the parts such as bushes etc



Please bear with me as i am a kit car novice - with little mechanical knowledge

So worked out that the remote linkage for the gearshift is attached to the old gearstick
Looks like a pretty Locost solution !

So the issue i now have is that the old gear lever is 12" from the position of the exisiting gear lever, the extension turret only moves this by 5 inches, will this work or will the gear lever be to far forward ?

Also what is the extension turret secured to ?

As my tunnel is covered in vinyl/ leather etc

Cheers