Board logo

Anti Run on solenoid
Big Stu - 23/9/02 at 08:15 PM

On my crossflow I have a weber 32/36, which is still giving me problems I think. One thing I am not sure about is that there is a soleoid which I am told stops the engine quicker? Is this needed? It operates when the ignition is removed and appears to vent the vacuum to stop drawing more fuel???????

Last thing what jets do I need for a 1300 with the above carb. Any help welcome.

Cheers

Stu


locodude - 23/9/02 at 09:23 PM

Hi
Nobody fits the anti run on thingy and I would'nt fit that carb either, it's too big, unless you're running a very highly tuned engine. You need the 1300gt carb. A 32/32 is borderline. I think it's a 28DCD but I'm not sure.
Chris PTM


stephen_gusterson - 23/9/02 at 09:38 PM

I remeber that i had a company mk2 escort estate - v reg - that had an anti run on thingy, if you need to know where to get one

atb

steve


Big Stu - 24/9/02 at 05:46 AM

So I can scrap the solenoid then. Good! On the choice of carb; I have got three I can choose from.

1.32/36
2.32 dfm Still twin downdraft.?
3.Standard single downdraft. Only mods are a good exhasut.

Cheers