I'm running a zetec on a four brand manifold using an32/36 webber carb. I've got a mega jolt ecu and was wondering if anyone would know what would be the best map to run it on? I currently have it uploaded with the standard zetec map.

Also where would I be able to find an LSD for a zetec at a reasonable price?

Thanks!
Sam

Best map would be to have it done on a dyno for your setup.

Lsd will depend on what axle / transaxle you are using. Then there are lots of choices depending on budget,

Re your other post yep st170 manifolds are 4-2-1 with large dia equal length primary's. they are made from steel so will be easier to chop about.

It's a zetec in a mondeo so standard subframe and axles

So the box is an Mtx75. I don't know of a cheap source of one of them. The st manifold may need some work to get it through the sump.

I've a ST170 box going free, 6 speed, not 100% sure about a LSD tho.

You'd have collect it from OX18 and I'm away again until the 4th of next month.

Regards Dan.

I've got an st170 box here but I'm the same not sure if it has an LSD. Will it's bolt straight onto a zetec?