Board logo

Prop uj replacement
Nurburg2006 - 23/5/13 at 11:12 PM

Hello guys I want to replace a uj on my sierra prop but there isn't any clips holding it in place inside or out any ideas? Or does it just need pressing out? Cheers

britishtrident - 24/5/13 at 06:31 AM

quote:
Originally posted by Nurburg2006
Hello guys I want to replace a uj on my sierra prop but there isn't any clips holding it in place inside or out any ideas? Or does it just need pressing out? Cheers


You can (or could) get UJ kits with all the tools to replace this type but in my experience they never worked properly.

ashg - 24/5/13 at 07:46 AM

its not worth the bother you can get a new prop for about £100.

Nurburg2006 - 24/5/13 at 08:53 AM

Where?????

britishtrident - 24/5/13 at 09:36 AM

If you goole on "Moprod universal joint kit" you should come up with somebody who has old stock but there are many variations and you have to get exactly the right kit.

But I must stress I have never seen these kits give a satisfactory (safe) result.

Nurburg2006 - 24/5/13 at 09:53 AM

Found a company who will make me a new prop for £120+ vat didnt think that was too bad

renetom - 24/5/13 at 03:55 PM

Hi
Try Autoprop near East Grinstead 01342 322623
He will fit you a new UJ .
And he's reasonable.
good luck