Hi Guys,

I have a standard 1300 xflow with a 32/36 weber DGV carb on top.
It's running pretty rich at the moment, anyone know what jet size would be best for this?
No idea what the current jet is, wouldn't even know how to measure it!

Regards,
Andy

Try 105/115. and anything up to 180 air corrections, though there should be no need to have a bigger space than 40 numbers between them. The jets are identified with a number stamped on the edge. Use a magnifying glass unless you, have very good eyes. The main jets are in the bottom of the float chamber....