LocostBuilders - powered by XMB

Modification of Blacktop sump[

ianm67 - 26/6/13 at 12:43 PM

Hello folks,
I have sump from a Zetec blacktop that I need shortening. Its the two piece type, steel pan with alloy section above. Is there anybody on the forum that can / might want to take on this work? if not, any companies that people can recommend. I'm on a budget so ERA / Raceline / Dunnell are all out of the question......
Thanks in advance,
IanM

loggyboy - 26/6/13 at 12:59 PM

Doesnt Strontiumdog do these?
http://locostbuilders.co.uk/viewthread.php?tid=181806

I did my own:

http://locostbuilders.co.uk/viewthread.php?tid=149348&page=2

lewis - 26/6/13 at 01:54 PM

Also did my own so cost me sweet f/a :-)

mark chandler - 26/6/13 at 05:09 PM

If you cut it I am happy to weld it back up for you.

Neat joins required and metal cleaned well or I quickly lose interest

Regards Mark

ianm67 - 27/6/13 at 09:58 AM

quote:
Originally posted by mark chandler
If you cut it I am happy to weld it back up for you.

Neat joins required and metal cleaned well or I quickly lose interest

Regards Mark

Hello Mark,
That's a very kind offer, I may take you up on that....

IanM