Chassis is 70% complete so I turned my thoughts to the drive train. Finally found a reasonably good low comp transit 2.0 Pinto which I intend supercharging. I have spent 3 weeks of evenings trying to locate a 1992 Transit wiring diagram so I can assemble an ignition system but have failed miserably. Can anyone help with a wiring diagram or send me a link ? the dizy is Bosche contact less 3 wire , carb is Webber with stepper motor and auto choke. Please help me out of my misery.
Alistair

I would be guessing that the transit used the bosch inductive unit, same as in the P100 sierra and same wiring diagram. In reality you can fit anything from a pinto sierra as long as you get the complete kit or even an old points dizzy from a cortina or capri that had a pinto. Aftermarket alternative like accuspark or magnetronic. Megajolt?
Three wire dizzy and inductive unit below. The earth wire in that big plug is not used in sierra.
[img]
Inductive + Bosch 2 wire Dizzy [/img]

Have a look at Nodiz,I have found it works a dream on my Pinto and far better than a distributor system. I found them very helpful to deal with.

MF

Gents thanks very much for your advice. Just to make matters more difficult my Dizy has no vacuum advance .Any idea why my profile still shows "unverified" even though I made a donation ?
Alistair