LocostBuilders - powered by XMB

2.0 Blacktop zetec flywheel

pekwah1 - 29/1/14 at 09:11 PM

Hi Guys,

I'm fitting a 2.0 blacktop to my type 9.
Can i use the standard flywheel, clutch and cover?
I know i'd need a spigot bearing a ct133, but someone mentioned something about needing to modify the clutch arm....
Is this just a load of rubbish?

Cheers,
Andy

stevebubs - 29/1/14 at 09:23 PM

No issues for me, but I swapped the flywheel for a 1.8 as it's lighter..

Dusty - 29/1/14 at 09:47 PM

You will need a spigot bearing. Ebay or your local ford dealer.

CCT133 is the QH part number for the correct clutch arm release bearing if mating to a type nine without modification to the clutch arm pivot point.

coozer - 30/1/14 at 12:47 AM

All you need is a solid flywheel off a 1.8 escort, spigot bearing, the clutch off a mk1 mondeo and a ct133 release bearing. The type 9 release arm will be ok.