Board logo

Blacktop inlet gasket
pekwah1 - 6/2/14 at 10:17 AM

Hi Guys,

What do people usually use for a gasket on the 2.0 blacktop instead of the rubber seals on the standard plenum?
Are the inlet spacings the same as the silvertop?

Regards,
Andy

Dusty - 6/2/14 at 10:22 AM

Make my own out of a sheet of gasket paper and a smear of grease.

big_wasa - 6/2/14 at 12:03 PM

As above or fast dan does them as do others.

whitestu - 6/2/14 at 12:15 PM

quote:

Make my own out of a sheet of gasket paper and a smear of grease.


Same for me - they cost a few pence each that way.

Stu

Paul Turner - 6/2/14 at 01:22 PM

I use the 1.8 Silvertop gasket I bought in 2001, been on 3 engines now.