Hi all

Have been beavering away at work with my latest project though the winter of a bespoke Duratec coil lead/cam cover that I plan to make out of Carbon Fibre or Glass so it can be painted. Also plan to make a second mould to produce a cover to do the same but without the cam sensor bump as some kit car duratec users don't use it. I know its a pain but there are some pics in my photo bucket album go and have a look and let us know your reactions. I will post up on here my progress once I have pulled out some covers out of the moulds.

Thanks in advance

Cheers

Tony

http://i1365.photobucket.com/albums/r743/tony1968cars/Mobile%20Uploads/20140228_180234_zpsbsa7tbag.jpg <<<<<single photo


http://s1365.photobucket.com/user/tony1968cars/slideshow/Mobile%20Uploads <<<<< slide show of pattern

[Edited on 2/3/14 by Thatcher]

[Edited on 2/3/14 by Thatcher]

Im liking that would be interested in one if you put in to production

Could also be interested in a cover if the price is right.

I'd be interested in a cover, price dependant.

Hi all,

Just a update at the mo I am off work recovering from a op but by the end of April I should be back to work to get the pattern finnished and to lay up the mould and my first part out by may...

Thanks

Tony.....

The pattern is almost done just polishing now so not long before it will be laid up for a mould.

Tony.

Mould is going to be ready for its first lay up once back to work after the xmas break.....

Tony.

Hi all, just a update on my mould prep and work, the mould is now laid up and should have a heavy glass one out of it this coming week then it will be my first carbon part will come out it.

Thanks for reading this....
Tony......

Hi all,

Just a update on my work on a carbon fibre Duratec coil lead cover. I have taken a heavy carbon part out of my glass fibre mould which will be a new pattern for a carbon mould. Then I will take a glass fibre part out of the glass mould to fit to my engine and sort out bracketry. Photos will follow

A link to photo of it is below.

http://i1365.photobucket.com/albums/r743/tony1968cars/Facebook/Kit%20car/20150309_104051_zpssirrv2xl.jpg

It is not a photo of a finished part as it was made from scraps of carbon and it is not trimmed to fit, but it is not long now before a fitted cover will be ready.

If you need a real time account of my progress you can via my instagram SPINEMINE

Thanks for your Patience

Tony.......

Hi all, at last I have a part out of my mould for you guys to look at. It will be much better as I am now working on a carbon fibre mould so the finish will be far better than at the mo.

Sorry for the delay

http://i1365.photobucket.com/albums/r743/tony1968cars/FB_IMG_1427566090903_zpsquehgfrq.jpg

Tony.

Now have a cover done and on my engine will post up a link for photos very soon.

Tony.

Hi all,

Just a up date on my progress. I have now had a carbon fibre cover and GRP cover out of my mould, trimmed and test fitted to my 2.0 duratec ST 150 engine and in the process of making a new pattern for a cover for the cam sensor to be deleted from the part for those who want to not use the cam sensor and to bring down the profile of the engine a little for clearance issues.

Follow this link for some pictures of my work so far.


http://i1365.photobucket.com/albums/r743/tony1968cars/20150604_0642391_zpsg7mrpbmj.jpg

Tony.

Not sure I need one as such but it would bling up the engine bay a little and with minimal additional weight! Have you any idea of the cost yet (the version without the cam sensor)?