Using a 711 xflow 1300 engine and a type9 gearbox.

Flywheel takes a 190mm clutch assembly, so which clutch will I
need for the 23 spline first motion shaft of the type 9?

I have a 215mm flywheel and clutch, but the flywheel hasn't got
the recess for the crankshaft.

Check out the spec on a cortina capri 2.0 4 spd drive plate
I know its 23 spline and its def smaller than 215mm

Have a looksy here:
http://www.national-auto.co.uk/assets/content/documents/clutch_cat_24.01.14.pdf

A quick peek suggests that a CK 9564 would give youa 190mm plate with a 23 spline centre.

Thanks lads, much appreciated