I have fitted a six clock instrument cluster to my car but I cannot find a connector to go on the end of the capri gauge ,it's a very coarse tapered thread have tried loads of places but no luck ,Help needed.

I have one with a small bore plastic pipe attached to it. I'll try to find it. If you don't hear from me, send me a U2U!!

Assuming you have the oil pressure gauge fed by capillary tubing? If so I bought a kit from Ebay for about £12 which contained the capillary pipe and necessary fittings for rear of gauge and sender on engine.

I did purchase on from eBay with connectors but the one for back of gauge was no way near ?