Does anyone make a off the shelf bracket to support twin throttle cables for my xflow striker running twin 40's. I've seen a pic of some that bolt onto the top of each carb corner clamping each cable making things nice and neat.
Ot is it a matter of fabricating a couple of brackets.
Cheers
Chris.

[Edited on 30/4/14 by cfc999]

Mangoletsi make some nice twin cable dcoe linkages.

Twin cable linkages not a good idea, they cause more friction and are likely to cause major damage to the carbs.

A single cable that is correctly adjusted to open the throttles 98 to 99% is the most reliable and effective way to go.

My twin 40's xflow powered Striker is up and running and all I'm after are some info regardind throttle cable support brackets.
My linkage is all set up and working as it should.
I just want to finish the engine bay off with some nice brackets that offer some support for my throttle cables from my pedal box to my twin carb linkage.

[Edited on 30/4/14 by cfc999]