2 Questions....

1. How much should I expect to pay to get an Aluminium Micra rad re-cored?

2. What's the best way to connect the different diameter outlets of the Micra rad and the Pinto water pump/thermostat?

Cheers

Nick

1, £25 should do it

2, I used Focus 1.4 hoses, they are 34mm at the ends, and 24mm in the middle (which is where I cut them!)

thanks mark, £25 seems reasonable and a good tip with the hoses too!

Cheers

Nick

If you need any tips on connecting the pinto to the micra rad, just let me know, mine works like a dream

Thanks again Mark, I'm sure I'll need some more info once I get onto plumbing it in.

Nick