Hi all

does any one have the bell housing pattern for the ford 1600 zetec / sigma engine

dimensions or cad would be good.

if not on cad I will draw it.

I have searched the interweb in vain.

If you want a shawspeed bell housing and standard type 9 (case freshly painted with gear stick and revotec encoder adapted and ford puma encoder) then I have one that I could make available, comes with rs2000 arm and both sizes of release bearing. If interested u2u me and I can send photos.

[Edited on 18/9/16 by Ugg10]

no thanks to the offer
making adapter to Porsche Boxster gearbox.
have the dimensions for Porsche but just cant find sigma zetec se .

any info will help

The Bell housing is off the car (jut fitted an RX8 box with a Freddy686868 adaptor plate, on Turbosport/ebay), if you want me to trace it and put it in the post I can if that would help. Otherwise contact Freddy he may be able to help.

http://www.turbosport.co.uk/showthread.php?t=980905

rx8 gearbox conversion plate Sigma zetec SE 1.6/1.7 Puma EngineCNC LASER CUT RWD


[Edited on 19/9/16 by Ugg10]

[Edited on 19/9/16 by Ugg10]