Hi,
Has anyone fitted the Chester Sportscars bike carb complete kit with Ignition etc. Wondering if its plug and play and how much the kit is these days.

Cheers

Had one of the earlier ones with megajolt (now use nodiz) on a stock 2.0l silvertop. Easiest thing ever, bolt on the manifold/carbs which were pre jetted and ecu preprogrammed. Just hook up the five or six wires and off you go, set the idle and run all day. The next owner had it rolling roadbed at 165hp, can't be bad. Iirc it was about £1k all in.

You will need either a bike fuel pump or I used a facet posiflow pump with a low pressure regulator, the bike carbs need about 2psi (a lot less than Weber).

Thanks mate, very interested in these

What engine?....if it's already fuel injected, I would go to ITB's