My diesel corsa cut out today. Got recovered by Rac
Fault code is 251 spill valve which apparently is part of the pump
If it's the pump unless I can source a pre 2002 pump the the car is scrap as the immobilizer is in the pump Google suggests it could be the ECU
that suffers from dry joints...
Anyone had experience in fixing?
It's the same engine as the old astra van
a very quick search finds seal kits for the pump, and some repair services covering said pump
Vauxhall Corsa 1.3 CDTI Diesel High Pressure Pump Repair Kit + free instructions
quote:
Originally posted by gremlin1234
a very quick search finds seal kits for the pump, and some repair services covering said pump
Vauxhall Corsa 1.3 CDTI Diesel High Pressure Pump Repair Kit + free instructions
sorry, thats what came up on a quick search, so could well be different.
may be worth contacting the seller though, since he does seem to know about these types of pump.
also as you say, further searching does indicate it may be a controller failure instead.
took the ecu off this evening....
managed to get inside without damage
found at least 4 dryish looking joints
re-soldered, and lid siliconed back on
fingers cross for tomorrow when i goes back on
it seems to be quite a common fault
if there are several suspicious joints, I would try and remake as may joints on the board as I could.
very often, there are faults you won't see
Refitted it this evening... Done 30miles and it seems ok
quote:well done, hope its fixed for another 15 years ;-)
Originally posted by dave r
Refitted it this evening... Done 30miles and it seems ok
i do hope so.... its a fun car