THIS MUST BE A BORING QUESTION 2 ALL YOU EXPIERENCED BUILDERS. BUT WHAT FLYWHEEL+CLUTCH AND RELEASE BEARING 2 USE + DO I AFTER MODIFY THE CLUTCH ARM. AND WHAT STARTER MOTOR 2 USE.?

Hi,
The only thing you need is a Westfield extended clutch release bearing (50 quid).
Everthing else is stock 2ltr clutch components.

Doug.

I'm using a flywheel, clutch pressure and friction plates from 1.8 Mondeo, starter from 2.0 DOHC (8 valve) and am modifying the original MT75 release bearing. You will also need a spigot bearing.

Mick

RICK,

DON'T SHOUT!!!

It's bloody annoying!

James

Hi, i have used 2.0ltr zetec with origional flywheel, new clutch and a modified Westfield release bearing Part No 324009. You will also need a spigot bearing to go into the end of your crankshaft to support the gearbox primary shaft (input shaft part No 324002, both those parts came to £63.20 inc vat and postage