Board logo

Rover pressure cap cross reference.
Bluemoon - 1/3/19 at 03:16 PM

I am looking for a 1.2bar pressure cap part number with the same fitment as:

PCD100160 (1.0bar) like this one

but at 1.2bar..

I want a genuine OEM one as all the "copies" I have had fail and start to leak.

Help can't seem to find the information I need on the web.

Dan

[Edited on 1/3/19 by Bluemoon]

gremlin1234 - 2/3/19 at 03:16 PM

does this help
The MG ZS180 uses a different coolant cap to all other models - rated at a higher opening pressure.
PCD000040
https://www.dmgrs.co.uk/products/mg-zs180-coolant-cap-v6-only-pcd000040-genuine-mg-rover

Bluemoon - 2/3/19 at 03:53 PM

quote:
Originally posted by gremlin1234
does this help
The MG ZS180 uses a different coolant cap to all other models - rated at a higher opening pressure.
PCD000040
https://www.dmgrs.co.uk/products/mg-zs180-coolant-cap-v6-only-pcd000040-genuine-mg-rover


I think they are 1.5 bar?

gremlin1234 - 2/3/19 at 06:05 PM

quote:
Originally posted by Bluemoon
quote:
Originally posted by gremlin1234
does this help
The MG ZS180 uses a different coolant cap to all other models - rated at a higher opening pressure.
PCD000040
https://www.dmgrs.co.uk/products/mg-zs180-coolant-cap-v6-only-pcd000040-genuine-mg-rover


I think they are 1.5 bar?

I don't know,
however the image on the rimmer bros site for that part number, seems to have 140 melted into it, and a red dot in the centre.
my guess would be 1.4bar 140kPa

https://rimmerbros.com/Item--i-PCD000040

Bluemoon - 4/3/19 at 08:30 AM

Found a partial answer:

http://www.presco-radiator-caps.com/autoapplications_new2.htm

Might help others ID what they have.

Dan