I'm looking for people who know their way around a standard Zetec installation.
I intend to use it with standard injection (budget issue) but can't find some things in the manuals I have. There must be some people here who know the answers to my questions! The questions can be found at:
http://www.mk-indy.nl/2005%2001%20(january).html

Thanks in advance!

I'll try and have a dig around in my Hayne manual

S

I have a Haynes manual, but it doesn't provide all the info I am looking for. Unfortunately. But thanks anyway.

Give Graham at
contact2005@zetecinside.com
an email, what he does not know is not worth knowing (tell him mark from the Midland speed championship forum told you to email him)
Mark

we have gone the same route as you.

id be interested to know what you intend doing about the amount of space between the throttle body and the bonnet, as we are undecided.

If it helps, Trust Electrical do a low-level inlet manifold suitable for the stock injection

I'm planning to use the 2 litre throttle body from the original engine but fit it to a 1600 zetec plenium/inlet which is much smaller than the stock 2 litre inlet.