Hiya,

Does anyone have the drawings/dimensions for the toyota 'S' Series engines, like the 3S-GTE or 3S-GE.

They were found in Celica's and MR2 Turbo's.

I can't find anything anywhere! Not even in the breakers yards at the mo.

Ta
Tim

I've a 3SGE that I plan to use once I've got through SVA..........

It's still in the car and I can get some rough dimensions if you like, but it won't be for a week or so as it's stored at my parents.

ISTR reading somewhere that it is slightly taller & heavier than the pinto. It doesn't sit vertically in the engine bay so if space allows, I shall mount it at the same angle & this should reduce the height.

Cheers for that Ian.

I'm not too concerned about the height as it is going in a middy, but I can't really start to design the rest without knowing the basic size I will need for the engine bay.

Many Thanks, that would help no end!

Tim

Tim,

You could always give these boys a try.

http://www.japaneseengines.co.uk

Speak to either Phil or Shaun. Tell them i sent you!

Cheers

Gary