Board logo

Audi V8 BAT code torque converter removal
Simon - 13/9/20 at 05:47 PM

Folks,

Need to remove the torque converter from my 2005 Audi A6 (C6) V8 engine and there is no obvious methods (not that I can see anyway).

So, are any of you familiar with this engine and do you have any suggestions? I know that some engines are supposed to have access via a "peephole" from front of engine but I can't see one. Maybe behind starter?

Cheers

theconrodkid - 13/9/20 at 06:40 PM

just had a look on fleabay, looks like the only way in is by removing the starter, 3 bolts hold converter to flex plate.

Simon - 13/9/20 at 08:06 PM

Perfect, cheers Conrod, will look into this week. Why didn't I think of that!

[Edited on 13/9/20 by Simon]

coyoteboy - 14/9/20 at 11:53 AM

Yep, had to do the same on mine - 3 bolts holding the converter to the flex plate.