Hi all again,
Ok so the saga goes on with my conversion from xflow to zetec black top in my striker.

I have bought and paid for a raw striker manifold from RAw back in september However it seems to be still being made????
Every time i manage to get some sort of reply from Raw its just another excuse.
So to my question.....

What other kits would have an exhaust manifold that will fit ideally through the side of the bonnet like the one from Raw or if has to be through the ally panel but with all the chassis rails?

Tiger?
Mk?
?????

Thanks

[Edited on 20/1/21 by simon04]

I dont have any dealings with Raw, but as the country is in a major "problem" and your exhaust is a bespoke item, i would imagine stuff like that is on hold. but frustrating as it must be for you, i would say to just hang on, its not as if you can IVA soon, as there all closed

steve

Steve thanks for the reply
raw are there but very sporadic in their ability to answer the phone.
most of the other suppliers are open but i was hoping someone may have experience of this
As for ive Done along time ago hence why it states xflow to zetec conversion.
Apreciate your comments though
I just very frustrated at the total lack of service from Raw

I think its GBS that has a Zetec exhaust that comes out over the top of the chassis. I have a used one here if you are interested.

Cheers
Mike

Thanks Mike
Have dmd you..