Hello does anyone know what size bolts / screws do I need to attach the half shaft flanges (No 13) to the axle case.


[img]
axle [/img]

pretty sure they are 8mm if metric and 5/16 if unf

5/16 unc bolts (3 dash tensile strength) on my halfshaft flanges, the diff casing flange uses unf nuts.

Dave

[Edited on 16/4/21 by obfripper]

Didn’t the mark 1 use 5/16” UNF and the mark2 8mm?

Thanks everyone it was 5/16 UNF