Type 9 gearbox leak I thought it was possibly the input shaft seal I removed the bell housing and found no gasket between the bell housing and gear box the selector shaft protrudes from what I guess is an open hole so I guess the gasket is important and would stop the gear oil escaping into the bell housing onto the clutch.
I have purchased a seal kit so I intend on doing them all any tips on fitting these and getting it oil tight would gasket sealant help what do you recommend?



Description

sposed to be a gasket there, i would try to find one, failing that, gasket paper and make one

like these ones:



https://www.burtonpower.com/bellhousing-gasket-type-e-9-gbrk704.html

https://www.burtonpower.com/bellhousing-gasket-type-e-9-cometic-gbrk704com.html

[Edited on 30/5/2022 by mcerd1]

I cut my own from a fosters lager box!