What do i need to order im running a 2.0l zetec with GSXR600 or 750 carbs, do i order the full magajolt light jnr set up at a $150 or do i only need a few bits?Do i have to order them from america or is there a uk supplier i dont like ordering things without speaking to somebody like to ask questions.

UK Supplier; Bill Shurvington, see postings on Blatchat and the Westfield Sports Car Club forum.

That's Blatchat

and WSCC

He will be able to advise and supply everything you need.

You will also need the edis 4 unit from a ford and the coil pack/vrs sensor ect see

http://picasso.org/mjlj/?q=

If you find a uk surplier at a competitive rate I would also like to know as Im about to order mine from the states.May be theres a discount for bulk purchase?

Have you any photos of your inlet manifold as this is another of my jobs to do,R1 40mm carbs on 1800 zetec mt75 box ..........

iv got my edis 4 unit paid £15 for everything, iv not go my manifold made yet my friend will be making me 1 will let you know how much it cost is there a big diffrence between gsxr600 and 750 carbs which is best for 2.0 zetec.I carnt see the chap on westfield site about the megajolt a phone number would be cool unless you have ordered from america with no problems and what to order.

No I can not see his number either ? I buy loads from the states on ebay and havent yet had a problem so will probly order direct. Would be intrested in info/pics of the manifold when you get it done.
How much for the edis 4? I got three for £10 from the scrappie with wire last friday.(mind you he charged me £2 for a 15 year old rusted fuel banjo the week before).

Guys,

best way to contact Bill Shurvington is to search for either Megajolt postings or usernam "Bill Shurvington" on either site and then send him an email via his profile.

That's how my mate bought his Megajolt kit.