Can anyone tell if they'll be big enough? Or should I try to get gsxr 1000 itbs

From what i can remember the 750 and 1000 throttle bodies are the same size.

They should be plenty big enough.

I was under the impression that

750's were 42mm
1000's were 44mm

(Problem is people quote different measurements i/d o/d etc)

I also thought that they were tappered so direct body size comparison to parallel items concerning bhp figures is'nt true

Take a looky HERE


Cheers


G

[Edited on 23/7/05 by Mr G]

GSXR 750 and GSXR1000 are the same.

My GSXR750 bodies are 48mm tapering down to 42mm (all internal diameter)

If you tune the engine then you may want something a bit bigger, but should be fine in std tune

S

i think 42mm is good for 50BHP per cylinder, naturally aspirated. this is from the jenvey website