hi i am in need of an exhaust system for my luego 4age, i know raw do one but not sure if it will fit because of the diaganal round tube on the side, where the exhaust should exit. has anyone fitted a raw sysytem to a book chassis???? please help me guys.

Thanks Rob

Rob, you have u2u.

quote:

---

Originally posted by r3nuf
Rob, you have u2u.

Drive Fast....Brake Late....Take Chances

---

quote:

---

Originally posted by r3nuf
Rob, you have u2u.

---

My build is bookesque. Cockpit is shortened 3", engine bay is lengthened 3". Wheel base and overall length is book.

Exhaust is 1-3/4", using the original flange (original tubes torched out). I bought two mandrel bent U's ($22 CDN) and cut the bend into 1/4's and one 1/8 bend. There is a finger width of space between the tube and the chassis. Tubes are about 20" long. Need to trim one tube and make a collector.

1-5/8" would prolly be better (oem size), but I couldn't locate that size.

G

Luego supplied my exhaust system, via a 3rd party fabricator. The fabricator seems to be up to speed with all the various different requirements e.g 16v, 20v, chassis variations etc. Not sure how the price compares though.

I've used the exaust manifold from Luego too for my 4AGE.



side view
Rich

thanks for your replies guys. think ill go for the luego option. as for sharing my info on the 4age. if anyone has any questions just give me a u2u or email me. im new to this forum thingy, should of got on here sooner as it is very handy. also im using a ae86 rear axle with lsd as standard, if anyone else is using this setup i would like to know.

thanks again guys Rob