Board logo

Coolant & header tank help
mad dad - 17/10/06 at 11:53 AM

This is probably a really basic/stupid question but can someone tell me where the hoses go re header tank to radiator (top and bottom hoses) to engine and back. I have a fireblade in an MK with no header tank and want to fit one although i have no coolant problems its really just for ease for checking......any help greatly appreciated


mike smith1 - 17/10/06 at 12:05 PM

Presuming its a carbed version see below sketchs found on this site kindly supplied by ChrisGamlin.

PRE 1998

[Edited on 17/10/06 by mike smith1]

[Edited on 17/10/06 by mike smith1] Rescued attachment 2BladePlumbing_pre98.jpeg
Rescued attachment 2BladePlumbing_pre98.jpeg


mike smith1 - 17/10/06 at 12:06 PM

POST 1998

Hope atleast one helps

Mike

[Edited on 17/10/06 by mike smith1] Rescued attachment BladePlumbing.jpeg
Rescued attachment BladePlumbing.jpeg


mad dad - 17/10/06 at 12:21 PM

That helps it was really where the 2 small hoses from the expansion tank went as all the others are already there and functioning the engine is carbed 1999 RRV but someone has suggested this engine (RRV) is a 1998!!! Thanks for quick reply


mike smith1 - 17/10/06 at 12:26 PM

RRV is a 1997 thats what mine is!!!

Mike


mad dad - 17/10/06 at 01:27 PM

thats 2 issues cleared up in one question...now thats service Mike, any probs with engine i should be wary of it seems to be very good at moment just clunky on gearchanges but thats normal i'm told.....oil change this weekend and then taking it in for valve clearance checks..thanks again


mike smith1 - 17/10/06 at 02:04 PM

No worries,

I dont know cant comment on driving yet as i'm not sva'd only been a short distance officer!

Mike


mad dad - 17/10/06 at 02:33 PM

well they certainly go well even if they are a bit raw big grin factor every time i go out....... and the looks you get are amazing i thiught the Subaru i had attracted attention but totally different wth the MK