I'm starting on the mifold for my zx9 carbs, does anyone know the correct angle the carbs need to be at?

cheers
Ray

The join where the float bowl fastens on should be level.

Ray which engine is the manifold for i have a jig zx9r carbs to pinto if any help Graham have a look in my photo archives under zx9

[Edited on 5/11/06 by jacko]

here is a pic of zx9r mounted in an MK, let me know if you want a better pic and I'll see what I can do

Cheers

Ian

Although it sounds logical . I dont think the carbs are always mounted with the float bowl joint level , you really need to see them on the bike and suss it, those ones above look very slanted including the float bowl join.

I'm getting confused in my old age .
I've got the sump join on the brain because I've just been reading about sumps.

Picture of the angle here.

[Edited on 5/11/06 by Peteff]
Rescued attachment carbangle.jpg

MINE arent level
(see first pic in archive)

[Edited on 5/11/06 by soggy 3]

[Edited on 5/11/06 by soggy 3]