Board logo

Type 9 Bellhousing bolt patern
ibakes - 12/2/07 at 12:45 PM

Howdy

Anyone have a drawing of a Type 9 bellhousing pattern (to pinto)you could send me at all please

Many Thanks in advance


rav - 12/2/07 at 01:16 PM

I'd quite like a copy of that too if anyone has it!
Cheers,
Mark


snippy - 12/2/07 at 04:51 PM

There`s a pic below of the adapter plate I made between my Pinto and type 9 if that helps. If not, both U2U me your addresses and I`ll draw around it on paper and post you a template. Luckily it`s out of my car at the minute!
Cheers,
Nick Rescued attachment Gearbox plate.JPG
Rescued attachment Gearbox plate.JPG


locost_bryan - 14/2/07 at 02:16 AM

Snippy, if you can measure the distance between a pair of bolts (call that A), then I'm sure someone could scan the image and convert it to a cad file, and a cad program should be able to work out all the measurements by using (A) as a reference.