at last i got my clutch problem solved and got the electrics figured out from my xr3i engine
and now i have problems with the coolingwater
I connected the tubes like i thought the must be, and i guess that is where my failure is
When the engine starts, the Expansion Bottle starts to fill up with water.
here is how i connected the tubes
the connection from the waterpump in front of the engine ==> is going to the under connection from the radiator
the upper connection from the radiator is going to the back of the engine, to the connection facing backwards
There is also a small connection facing upwards ==> that is connected with the upper connection from the Expansion Bottle
i think these tubes are ok, becaus there is no other way to connect them
thene i got two connections : one at the back of the engine on that housing, its facing left. And the i got one on the manifold.
The original tube from the escort was still there and connected those two. SO i connected those both tubes to the under connection from the Expansion Bottle.
I hope you understand what i mean. Because it's tough to explain
Now does anybody now what the problem is ? or does anybody got a diagram of the connection?
cheers
melvin
