I have a skyline turbo with a six bolt dump flange (output of turbine).

Anyone know where i can got a flange from, I managed to get one from ebay america, got the flange ground flat after welding and the engineer lost it.

Can`t get the flange anymore from that person on ebay.
Thanks
Darren

make one on paper and have it laser cut. This enables you to make to your specs (thickness, material and shape).

I managed to do a cad drawing, but it was very complex. Main problem i have is that it is not an autocad format.
Need to convert its format otherwise the laser cutters will have to manually enter the data.

send it through and I'll see what I can do for you with the file.
you can email it to info@alphax-kitcars.com

Cheers its a turbocad .tcw file, is that any good?

Thanks
Darren

tubocad should be able to export as a .dxf wich is standard interchange between different cad programs

Do you need a complete downpipe or just a flange piece? I got the flange piece from the bottom of the downpipe into the rest of the exhaust laser cut - just made a template up.

Have you been on the Skyline forum? They're bound to know.....

Just the flange, going to weld it up to 63mm pipe.
Re turbocad, it is a free version, which will not export, does everything else.

Thanks
Darren

[Edited on 9/4/07 by turbodisplay]