I succesfully modified and fitted the V6 type 9 to my 2.1 Pinto with 30mm spacer, RS2000 ally bellhousing and lever only to have a problem with the clutch not disengaging. The pedal feels very tight from the first push all the way down. It feels like the cable is just stretching.
There is some movement at the clutch lever.
Clutch pawl has been modified and gives more than adiquate movement.

I am a bit lost as to what to do next, any ideas before i pull the engine and box yet again?

This is a right pain as i am so close to moving the car under its own power for the first time

[Edited on 6/5/07 by snapper]