For those with a crossflow engine, what have you done with your breathers off your carb to get max performance, have you blocked them, connected them to somthing else or what.

Mine is a 1300 with a twin choke webber if that helps.

All advise greatly received.

Many thanks

Dave

[Edited on 11-5-07 by davrus]

Left mine as standard. May be fitting a catch tank with new engine though.

Left as standard? have you used the original air filter box then of connected them to another one.

Now that you've mentioned it, it's not quite standard!!
It's so long since I did it, I forgot!!
All I've done is taken the breather to the inlet manifold, an elbow was used rather than a tee at the manifold end.

HTH