I got a local company to adapt my fuel rail fittings on my 4age. They added tails which I can connect to the brass connectors using jubilee clips onto the main copper lines. Trouble is I asked for 8mm ID, but when I get them home they have used 9.5mm ID. Question is, will the jubilee clip take up the 1.5mm and make the connection without leaking fuel?

I wouldn't use Jubilee clips on fuel lines - they tend to pinch the pipe if they are a bit loose to start with and might leak. Use proper fuel pipe clips which are the correct size for the od of the pipe you are using.

vwp for proper pipe clips.

9.5mm hose on a 8mm pipe is no good. I would use 3/8" pipe, which is 9.5mm, or have the hoses made up with 8mm tails.

Paul

Thanks guys,

I have ordered some adaptors....