Board logo

what bike carbs on zetec
oadamo - 4/6/07 at 06:08 PM

hi what bike carbs have you got on a zetec. or what do people use. do you have to get them rejetted

big_wasa - 4/6/07 at 06:20 PM

fire blade carbs are cheaper than R1 and are 38mm.

As good as any other ?

Danozeman - 4/6/07 at 07:11 PM

Iv got zx9r's on mine.

bob - 4/6/07 at 07:20 PM

Fireblade

I'll let you know how they go when i get MOT and rent on the car.

Sent mine to bogg brothers to sort out and jet, manifold was about £180. Rescued attachment indy re-fit0753.JPG
Rescued attachment indy re-fit0753.JPG

givemethebighammer - 4/6/07 at 07:27 PM

Blackbird ones on mine

givemethebighammer - 4/6/07 at 07:30 PM

Just to hijack, Bob you'll probably need a return spring on your carbs (the bike originally had two cables, one to open the throttle and the other to close it). Without a spring my carbs wouldn't settle to idle very quickly at all after blipping the throttle.

coozer - 4/6/07 at 07:43 PM

ZZR1100 on mine but there's no TPS so I'm looking for another set.

Steve

Krismc - 4/6/07 at 07:59 PM

GXSR 750 K5's.......

HMMM......

rusty nuts - 4/6/07 at 08:04 PM

quote:
Originally posted by Krismc
GXSR 750 K5's.......

HMMM......



But aren't they throttle bodies, not carbs?

Krismc - 4/6/07 at 08:08 PM

Sure are.... take the hint and fit throttle boddies!!

oadamo - 5/6/07 at 05:47 PM

do you think cbr 1000 carbs would be any good theres a couple on ebay for £34 do you think its worth a gamble ?
adam