Board logo

throttle bodies
oadamo - 23/6/07 at 02:38 PM

hi
iam making my own throttle bodies but for the brake cylinder how do you go about tapping into the bodies can you tap into the inlet runners. and do you need to tap into all 4 or just one
thanks adam

DIY Si - 23/6/07 at 03:03 PM

One might be enough. My 205 is plumbed in that way, from just one of the inlet runners.

mark chandler - 23/6/07 at 07:20 PM

You can lose the servo on a "7".

So no need to worry about it.

Regards Mark

oadamo - 23/6/07 at 07:47 PM

quote:
Originally posted by mark chandler
You can lose the servo on a "7".

So no need to worry about it.

Regards Mark


its on my saxo track car but ive just come to me that iam converting it to turbo so i can just hook it to the boost lol
adam

rusty nuts - 23/6/07 at 07:48 PM

Servo works on vacuum not pressure!

oadamo - 23/6/07 at 07:55 PM

ive just looked and on my rs its got a one way valve onto the chamber so it cant see the boost you learn somthing every day lol
adam
blonde moment lol