Anyone know where i can get hold of a set of drawings / exploded parts diagrams for R1 bike carbs?
Cheers
Mac

How odd i was just going to post exactly the same as i need to know how easy it would be to re-space them.

Would be very interested if anyone knows

Cheers

Paul

Is this what you are looking for?

http://216.37.204.206/alljet/Yamaha_OEM/YamahaMC.asp?Type=13&A=302&B=13

hth,

Simon

Whole Yamaha service manual available here MY 98/99 Service Manual

See section 6 for carbs.

DSR Racer - All Docs

Also avilable here is Model Year 2000 supplement and service manual for MY 2002 onwards.

[Edited on 15/7/07 by AspectCarl]

Class, thanks guys spot on, cheers for that
Mac

[Edited on 15-7-2007 by viatron]

returned your u2 saved me a job

[Edited on 15/7/07 by big_wasa]

Hi,
I split my carbs up, R1, the 2 outer carbs needed splitting by 40 & 45 mm. I used threaded bar to make the 2 new long securing bar and then turned down the 5 linking pipes out of stainless. for the air link pipes i used ali pipe and they work fine.
The choke i extended using round bar and the throttles i extended using flat plate.

I put ali pipe around the 2 long bolts to make it look tidier.
They do work fine.
Regards
Bob

[Edited on 16/7/07 by bbwales]