Hi,

Is there a locost way of syncing bike carbs? I intend on a trip up to boggs @ some point but this it would be best to have an ok setup befor diving the 100 miles and want it @ its best for its MOT this week

Cheers

It is possible to get them somewhere near just by using a bit of hose pipe and putting one end in the intake and the other against your ear.I always used to adjust SUs this way and have found it to work on webers and throttle bodys also.
It wont get it exact but good enough for an initial set up.
Paul.

Easy to do using a vacuum gauge if you have one.

Here are some LOCOST carb balancer links.

http://www.powerchutes.com/manometer.asp

http://www.airheads.org/content/view/183/98/

http://www.deleveld.dds.nl/carbsync.htm

http://web.ncf.ca/ag136/carbsynch.htm

http://faq.ninja250.org/index.php/Is_there_a_carb_sync_tool%3F


Or there's my World's most expensive carb balancer here. With many thanks to Bill Shurvinton for his help.

Neil

[Edited on 20/8/07 by trikerneil]

[Edited on 20/8/07 by trikerneil]