Board logo

XFlow water pump
donut - 28/9/07 at 05:08 PM

How do i know if my kent xflow 1600GT engine has a VISCOS FAN water pump as there is no fan on the engine?

Thanx

dave-69isit - 28/9/07 at 05:12 PM

viscus screws on to the front off the pump fan bolts on the front with four bolts

paulf - 28/9/07 at 05:14 PM

Does it realy matter? I assume you will be fitting an electric fan. I did find that my crossflow needed a spacer for the water pump pulley to line up with the crank pulley so that may be the difference if there is one.
Paul.

dave-69isit - 28/9/07 at 05:15 PM

looking at your piks its not viscus

Fatgadget - 28/9/07 at 05:45 PM

A viscous fan is attached to the pump by a single left threaded nut/bolt.Normal fans are attached by 4 bolts.

[Edited on 28/9/07 by Fatgadget]

donut - 28/9/07 at 07:03 PM

Ta!