Hi

Is there anyone / company / garage?

that will do an engine change for you? I have a sierra 2 litre dohc fitted at present but I have a 1600 (vulcan prepaired) on the way and would like someone to fit all

engine is greatly tuned including twin 40s jetted by vulcan,#

any help please

John

Have you tried your local, freindly garage?

No

thought soomeone might know someone who is more familiar with kitcars

they will know if my mt75 box will be ok and what clocks to get and be a bit more experienced with the wiring?

thanks for the reply

john

Location would possibly help? Not a difficult job to do yourself though

DOH

manchester

just want the job done quickly

thanks

Hi
Its not arrived yet but I think its the engine from an xr3.
Does anyone know which clocks to use, just so I can start looking at prices?
will the sierra box be ok with this?
regards john

Have you tried MK Sportscars? They will be familiar with the car and what is required, so even if they can't do it in the timescale you require, they could at least give you a price to use as a benchmark for others.

Phil

thanks for the idea, Hellfire.

I will drop them an email.

Do you know if my sierra MT75 box will be ok to go with the 1600 xr3 engine?

regards john

[Edited on 19/11/07 by IndyJohn]

you dont mention what type of engine - x flow /cvh etc

i think someone who is a ford afficiando will tell you about the box , fwiw , the box was fitted to pinto/dohc cars , so unsure if the cvh would work with it .

the problem with mt75 is the integral bellhousing .

If it's a 1.6 from an XR3 then it will be a CVH. The bellhousing bolt spacing is the same as the Pinto, Xflow, Zetec etc. so an MT75 box should fit ok.

I can't help thinking it's a little bit of a sideways move from a 2.0L Pintosaurus though. A bog standard el cheapo 2.0L Zetec would be giving simmilar power to a well tuned 1.6 CVH (normaly aspirated) with rather more potential for more.

Hi
it is a cvh
Like I said it is highly tuned by Vulcan ( apparently revs over 8K) with twin 40s jetted by Vulcan comes with an array of spares all in a shinny blue paint!

reason for the sideways move , Cost £300 plus two of my spare tyres! Think that was why I went for it!

regards john

Hi

got no reply from Mk!

Has anyone any contacts outside of Manchester?

I have a trailer so any contacts of anyone wanting the work?

regards john

Hi

Just had a rough quote of about £700

regards john