Hi folks,

I have a small Nissan Micra alternator fitted but I am not sure where all the wires go. I know that the large, main charging wire goes back to the battery one way or another but there is also a connctor which goes into the alternator with two wires comming out of it. The one thing I thought they might be for is regulating the voltage and perhaps going into the ECU (on the Micra) but my locost is a bit more basic than that, I have a Pinto Engine fitted with no ECU.

Therefore, does anyone happen to know what these wires are for, if I need them and if so, where they need to go to?

Thanks,

Matt

Is it a nippon denso if so this might help



or this http://www.westfield-world.com/daihatsu_alternator.html

If not try searching on the net for nippon denso alternator wiring as there is quite a few details

[Edited on 13/3/08 by neilj37]

[Edited on 13/3/08 by neilj37]