Board logo

Landy back propshaft
r1_pete - 26/3/08 at 10:52 AM

Anyone know if the landrover discovery back propshaft has a sliding joint in it? Just got my MT75 propshaft flange from Bailey Morris, and its the larger 27mm UJ fitting so looking for a locost way of building up a prop.

Mr Whippy - 26/3/08 at 10:53 AM

yip, front and back

their just a Defender with another body

[Edited on 26/3/08 by Mr Whippy]

TGR-ECOSSE - 26/3/08 at 10:54 AM

quote:
Originally posted by Mr Whippy
yip, front and back


I was going to say that!!!!
You have to be quick to get a reply in before Mr Whippy

[Edited on 26/3/08 by TGR-ECOSSE]

Mr Whippy - 26/3/08 at 11:03 AM

mark chandler - 26/3/08 at 01:56 PM

Thats what I used on mine.

Just make sure it slides freely, later ones have a nylon cover on the splines which is good, however sometimes the shaft below this jacket starts to rust causing the splines to lock solid.

NS Dev - 26/3/08 at 11:25 PM

I have some nylon sheathed landy propshaft ends if they are any use, removed from their tubes ready to be welded into new ones