I need these figures and at what RPM they occur to use the VE table generator on my ECU. I know the orginal figure for the XE was 150 BHP but I have no idea what revs this is generated at.

I wouldn't bother with the VE generator, it's useless with 'peaky' engines (i.e. anything with the max torque close to max bhp rpm, i.e. anything not an american v8). If you do try it you'll probably find it will compress a normal looking VE table into the top half of the load range, and leave the bottom half empty.

Well I need to start somewhere on the VE table, unless anybody has one I could use?

Can someone explain where to start generating a VE table if the tool is not so good - Must admit, I used the tool, and it came up with a table that really did not look too good.....Any help on calculating a VE table would be welcome....

Paul.

My engine is not standard but I've got the graph from my rolling road session in my photo archive..

Ned.