Hi,

I've got a 90 degree banjo and a T piece banjo for my webers, but the bolt that goes through the middle of the T piece is smaller than the hole and wobbles about in the banjo (see picture). Do I just try and line it up in the middle and hope for the best? I'd rather not where petrol is concerned [pg=]

Methinks thats a major fire hazard in the making, wrong bolt for banjo take it back to the plonker that sold u it and ask for a replacement. The outer is too big for the bolt.
Shug

[Edited on 16/11/03 by Hugh Paterson]

I've bought two now, one from Yukspeed, and one from Rally design

What u mean two t-piece banjos with loose fitting bolts like the photo on the left?
Shug.

Yep. I bought one, thought thats not right, so ordered another while getting other bits.

Both the same

Northy u2u on the way
Shug

Dave think I prefer the look of the older version I have a box of weber bits not seen the ones he got from Rally design before, but suppose it helps when yr friends the local weber franchise
Shug.

Just thought I'd say the second T piece Banjo came from Burton Power and not Rally Design.

Oppps.