Board logo

Zetec locking pin (crank)
madteg - 17/4/08 at 07:26 PM

Does anyone know what it looks like so i can make one as this is one of those things you use once, and then put in bottom of toolbox and forget about.

[Edited on 17/4/08 by madteg]

big_wasa - 17/4/08 at 07:50 PM



taken from ebay.

madteg - 17/4/08 at 08:13 PM

Do you know the measurements and size of thread, thanks kev.

jollygreengiant - 17/4/08 at 08:34 PM

quote:
Originally posted by madteg
Do you know the measurements and size of thread, thanks kev.


Now the Kev me boy, if you ask me nicely and remember my stainless tubing you could borrow my locking kit AND if you ask me really nicely I might even get the wife to drop it of at your house tomorrow.

r1_pete - 18/4/08 at 07:28 AM

After asking a similar question on here, I bought one of THESE off fleaBay, at £15 all in it wasn't worth arsing about making one.