Are the engine mounts on the Zetec and CVH the same design, ie bolt pattern and size?

Cheers in advance,
Chris

no. L/H mount at least is different. Think the R/H mount may be interchangeable, though.

Above is correct BUT

1.8 RWD CVH mounts won't fit a FWD CVH or a Zetec as the FWD engines don't have the required bosses on the block casting.

[Edited on 24/4/08 by britishtrident]

The back one, if viewed in a FWD car, has the lowest of the three bolts in a different place. Some people bodge it with just two, but you should really cut and shut the mount to move the hole to the right place.

Chris